Find the answers to your frequently asked questions regarding Genesys Conferencing Services.
Can I record and store archives of my meetings?Yes. With Genesys Meeting Center, you can record your meetings for access at a later date. Participants who are not able to attend the live meeting can tune in at a time that's convenient for them. Please note that recording and archiving incurs additional charges.
How do I record my audio call? Press *17* to record.
As an administrator, should I register on behalf of my department or will there be one registration per country?Yes, you can register personally and on behalf of the group you support. There will not be one registration per country as costs will be recharged back to the cost centre level.
Will participants be able to dial into a local number to access the meeting, regardless of their location?All the participants will dial the host's Genesys Meeting Center number, which is usually a local number issued in the host's country.
I'm currently using a conference call provider that supplies a PIN code for both participants and moderators. Is this the case with Genesys Meeting Center?No. Only the moderator needs a PIN to use Genesys Meeting Center. Participants simply dial in using the Genesys Meeting Center number supplied to them by the moderator. What if I forget my PIN code? Call 1-866-GENESYS. After verifying the identity of the chairperson, they will provide you with your PIN code.
How many people can participate in a conference call? Each account can handle up to 100 participants. However, customer service will generally set up the account with 30 participants unless otherwise requested.
Do I need to make a reservation? No, you can use your Genesys Meeting Center number at anytime 24 x 7. There is no need to make a reservation once your subscription is activated.
What happens if I don't press *9* to disconnect the call? Most of the time this will not be a problem. However, on occasion lines don't fully disconnect and remain active on the conference call after everyone else has disconnected. For security reasons however, it is recommended that the Host always press *9* before disconnecting if he does not want anyone to remain in the room after he/she disconnects.
I am the host and entered my PIN code but I am still listening to music. The host must press the * key on their telephone keypad before and after the PIN code (for example, *1234*). The system will only register what you enter between the * key, before and after the 4 digit PIN code. Therefore the first * should be pressed firmly. If you still cannot enter the room, contact your local Genesys customer support representative for further assistance.
How do I dial-out to an international party? You can dial-out to an international participant from the Genesys Meeting Center conference room to another country:
There is noise, music, or echo in my conference. Who can help me with that? Noise in the conference can come from a variety of sources. Cell phones and speakerphones are a common culprit. Another common source of the problem could be a bad line connection from one of the callers. As the host you might want to ask your participants to pick up the receiver if they are on a speaker phone, dial in on a land line if they are on a cell phone or have the participant hang up and dial back in again. If the noise began right after a particular participant entered the conference room, you can press *2* to disconnect that last incoming line. Individual participants with noise on their line can activate self mute, by dialling * 6 * . You may also contact customer support for further assistance in isolating the offending line.
I am a participant. Our company has issued us individual pass-codes for the conference. When I call the number and I enter my pass-code I still hear only music. Even though you have participant pass-codes for the conference call this will not give you access to the room until the moderator enters the room and opens it up. The purpose of the digicode function is so that the moderator of the call may have further identification of the incoming participant. It is a security feature but anyone with an individual digicode will still not have access to the conference room until the moderator enters the room, opens the door and activates the digicodes by pressing *PIN + 70*.
How do I get my own Genesys Meeting Center number?A. To obtain your own Genesys Meeting Center number, please order online, or call your Genesys Sales Office.
If the host of the conference disconnects will that automatically disconnect everyone else? No, it will not. If the moderator does not press *9* before disconnecting, then anyone who stays on the line will be able to continue with the conference call.
Can the participants talk to each other before the Host dials in for the conference? Anyone who dials in before the moderator will be in a "waiting room" listening to music until the moderator opens access to the room. The participants will not be able to hear each other or know if anyone else is waiting as well.